Platinum Preventive Maintenance Program
We are pleased to offer Haas customers a comprehensive Preventive Maintenance Program carried out by our Haas Factory-Certified Service Engineers. Protect your Haas investment and maximize your productivity by utilizing locally available Haas factory-certified professionals to keep your machine in the best possible condition. Essential items addressed at every preventative inspection are listed below.
Preventive Maintenance Inspection Items
Electrical System
Check incoming voltage
DC buss voltage
Logic voltages
Condition of wires and connections
Ensure fans are working
Check regen resisters
Check vector drive
Check transformers
Check cabinet filter
Check motor connections and brushes*
Operator Panel
Condition of keypad
Function of keys, buttons, remote handle jog*
Condition of floppy drive*
Adjust CRT if needed
Check door rollers, switches, rails
Operation of chip auger/conveyor
Wipers/Seals/Windows/Bellows
Check if in good working condition
Pneumatic System
Check filters*
Check hoses and fittings
Check for leaks
Check pressure switch
Way Lube System
Inspect filters
Inspect lines and fittings
Check proper pump operation
Spindle/Transmission
Check transmission oil
Condition of belts
Condition of air lube lines
Condition of spindle taper or chuck
Hydraulic Power Unit*
Check oil level and condition of oil
Check for leak
Check max pressure
Check low pressure switch
Check gauges
Check that filter has been changed
Coolant
Check condition of hoses
Check for leaks
Coolant pump and filters
P-cool operation
Optional Special Services
Must be completed at time of preventive maintenance.
Through Spindle Coolant (mills)
High Pressure Coolant (lathes)
Check pre-charge pressure, hoses, pressure at pump, seal housing, and filters.
Pallet Changer or Parts Loader
Check for wear on rollers, status of switches, alignment to machine, condition of bumbers, and remote operator panel.
Bar Feed (Haas brand only)
Check alignment, switches, and repeatability.
Vibration Analyzer Test
Verifies machine vibration against established criteria. Isolates potential problems while still manageable.
Ball Bar Calibration
Used as a diagnostic tool, the ball bar tests circularity and verifies the positioning accuracy and repeatability of your machine tool. Only available on mills at this time.
* if applicable
Vertical and Horizontal Mills
Price Per Visit
| TM1-2 | $800 |
| TM-3, GR | $900 |
| MM, SMM, VF1-2, VM2 | $1250 |
| VF3-5, VM3 | $1350 |
| HS1, EC300, EC400 | $1650 |
| VF6-11, VM6, HS2, EC500, EC1600-3000 | $1450 |
| HS3-7, EC630, VS, VR | $2500 |
Horizontal Lathes
Price Per Visit
| TL1-2 | $800 |
| SL10-20, TL15, GT | $900 |
| TL3-4 | $1250 |
| SL30-40, TL25 | $1500 |
Optional Special Services
Price when performed at same time as PM:
| Through Spindle Coolant (Mills) or High Pressure Coolant (lathes) | $395 |
| Pallet Changer or Parts Loader | $395 |
| Bar Feed (Haas brand only) | $395 |
| Check Backlash in X, Y, and Z axes | $100 |
| Vibration Analyzer Test | $295 |
| Ball Bar Calibration | $125 |
| Recharge Counterbalance | $100 |
Prices reflect costs per visit per machine. All prices are subject to change anytime.
Additional service, repairs, and parts for repairs are scheduled with the HFO and are subject to standard service rates. The Preventive Maintenance Service provides a list of necessary repairs and possible parts needed for future maintenance.